TM 9--2350--292--10
0036 00--2
OPERATE SUBFLOOR ACCESS PLATES AND DOORS
0036 00
3. Hydraulic reservoir access door (3) -- Open door to gain access to hydraulic reservoir drain valve.
4. Right rear subfloor stowage compartment (4) -- Open door to gain access to BII components.
5. Hydraulic reservoir access plate (5) -- Remove two screws, two flat washers, and access plate to gain access to
oil level bayonet gauge and filler cap.
6. Electromagnetic clutch access door (6) -- Open door to gain access to electromagnetic clutch oil level bayonet
gauge and fill/vent cap.
7. Left rear subfloor stowage compartment (7) -- Open door to gain access to BII components.
8. Center front subfloor stowage compartment (8) -- Open door to gain access to BII components.
9. Left front subfloor stowage compartment (9) -- Open door to gain access to BII components and bilge pump.
10. Hoist winch subfloor access plate (10) -- Remove four screws and four flat washers. Remove access plate to gain
access to hoist winch level/fill plug and vent plug.
11. Service brake linkage access plate (11) -- Remove four screws and four flat washers. Remove access plate to
gain access to service brake shaft lubrication fittings.
4
3
5
6
7
8
11
10
9
END OF TASK
