Removal - TM-9-2350-292-20-1

GAUGE PANEL ASSEMBLY, SUPPORT AND WIRING HARNESS 4W152 REPAIR

TM-9-2350-292-20-1 Carrier Ammunition Tracked M992A1(NSN 2360-01-362-3021) EIC:AE6 Manual
Page Navigation
1208

TM 9--2350--292--20--1 0243 00--2 GAUGE PANEL ASSEMBLY, SUPPORT AND WIRING HARNESS 4W152 REPAIR -- CONTINUED 0243 00 Removal--Continued 2. Remove four screws (3), five lockwashers (4), ground strap (5), four flat washers (6) and gauge panel assembly (2) from hull. Discard lockwashers. 3. Remove four nuts (7), four lockwashers (8), four screws (9), four flat washers (10) and wiring harness 4W152 (11) connector J1. Discard lockwashers. 4. Remove screw (12), two lockwashers (13), ground strap (5) and ground lead of wiring harness 4W152 (11) from gauge panel assembly (2). Discard lockwashers. 5. Remove three screws (14), three lockwashers (15) and support (16) from gauge panel assembly (2). Discard lockwashers. 6. Remove speedometer (WP 0694 00) and tachometer (WP 0695 00). Figure 56 9 3 3 4 5 2 6 4 4 6 7 8 10 11 12 13 13 11 14 14 16 15 15 14 15

Privacy Statement
Press Release
Contact