TM 9--2350--292--20--1
0297 00--1
WIRING HARNESS 3W180 REPLACEMENT
0297 00
THIS WORK PACKAGE COVERS:
Removal, Installation
INITIAL SETUP:
Tools and Special Tools
General mechanic’s tool kit (item 1, WP 0717 00)
Materials/Parts
Lockwasher (item 336, WP 0718 00)
Marker tags (item 49, WP 0716 00)
Equipment Conditions
Vehicle MASTER switch OFF (TM 9--2350--292--10)
Battery power disconnected (WP 0256 00)
Voltage regulator cover removed (WP 0239 00)
References
TM 9--2350--292--10
Removal
NOTE
Tag all electrical connections and electrical leads prior to
removal to aid in installation.
The following legend identifies attachment points for each
connection.
1. Remove wiring harness (1) and attaching hardware, at the following attachment points:
Item
No.
3W180
Connector/Lead/Wire
From
Connector/Lead/Wire
Component
Location
2
Connector P1
Main Engine Voltage Regulator
Connector J1
Engine Compartment
(Left Side)
3
Wire GND
Main Engine Voltage Regulator
Engine Compartment
(Left Side)
4
Connector P2
Wiring Harness 3W143 Con-
nector J1
Engine Compartment
(Left Side)
5
Connector P3
Relay Connector J1
Engine Compartment
(Left Side)
2. Inspect parts for damage and replace as required.
