TM 9--2350--292--20--1
0337 00--1
FUEL SHUTOFF WIRING HARNESS REPLACEMENT
0337 00
THIS WORK PACKAGE COVERS:
Removal, Installation
INITIAL SETUP:
Tools and Special Tools
General mechanics tool kit (item 1, WP 0717 00)
Materials/Parts
Self--locking nut (item 385, WP 0718 00)
Lockwashers (4) (item 425, WP 0718 00)
Electrical tiedown strap (item 382, WP 0718 00)
Marker tags (item 49, WP 0716 00)
Equipment Conditions
Vehicle MASTER switch OFF (TM 9--2350--292--10)
Battery power disconnected (WP 0256 00)
Engine deck assembly removed (WP 0417 00)
Front cooling fan removed (WP 0235 00)
References
TM 9--2350--292--10
Removal
NOTE
Tag all electrical connections and electrical leads prior to
removal to aid in installation.
1. Disconnect fuel shutoff wiring harness (1) from fuel metering pump (2).
2. Remove self--locking nut (3) and screw (4) from three loop clamps (6). Discard self--locking nut.
3. Remove electrical tiedown strap (7) from fuel shutoff wiring harness (1). Discard electrical tiedown strap.
4. Remove four nuts (8), four lockwashers (9), four screws (10) and fuel shutoff wiring harness (1) from engine
shroud (11). Discard lockwashers.
5. Inspect parts for damage and replace as required.
Figure 4
FORWARD
1
2
3
4
6
6
6
10
11
8
9
7