TM 9--2350--292--20--20362 00--7HYDRAULIC BRAKE HOSE ASSEMBLY, BLEED VALVE MANIFOLD ANDASSOCIATED PARTS REPLACEMENT (NEW CONFIGURATION WITH BRAKEMODULATION) -- CONTINUED0362 00Removal--Continued26. Remove elbow (59) from floor plate (54).27. Remove brake pressure gauge (61) and preformed packing (62) from bleed valve manifold (57). Discard pre-formed packing.28. Remove two nuts (63), two lockwashers (64), two flat washers (65), two screws (66) and bleed valve manifold(57) from angle (68) and bracket (69). Discard lockwashers.29. Remove elbow (56), elbow (60), two preformed packings (70) and manual pull valve (71) from bleed valve man-ifold (57). Discard preformed packings.30. Remove two screws (72), two lockwashers (73), two flat washers (74) and brace (69) from APU control box mount(75). Discard lockwashers.31. Remove screw (76), lockwasher (77), flat washer (78) and angle (68) from floor plate (54). Discard lockwashers.32. Inspect parts for damage and repair as required.5475597157706066567061626863646576777863646572737469
Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business
