TM 9--2350--292--20--2
0675 00--2
REMOTE TERMINAL UNIT REPLACEMENT -- CONTINUED
0675 00
Removal--Continued
7. Remove screw (13), lockwasher (14), clamp (15) and ground jumper (16) from hull. Discard lockwasher.
8. Remove four nuts (17), four lockwashers (18), four flat washers (19), four screws (20) and remote terminal unit
(21) from ammunition storage rack (22). Discard lockwashers.
9. Remove nut (23), lockwasher (24), flat washer (25) and ground jumper (16) from remote terminal unit grounding
stud (26). Discard lockwashers.
10. Inspect all parts for damage and replace as required.
Installation
1. Install ground jumper (16) on remote terminal unit grounding stud (26) with flat washer (25), new lockwasher (24)
and nut (23).
2. Install remote terminal unit (21) on ammunition storage rack (22) with four screws (20), four flat washers (19), four
new lockwashers (18) and four nuts (17).
3. Install ground jumper (16), clamp (15), and new lockwasher (14) to hull with screw (13).
13
14
15
16
17
18
19
20
21
22
23
24
25
26
