Disassembly - TM-9-2350-292-20-2

TM-9-2350-292-20-2 Recovery Vehicle Heavy Full-Tracked: M88A2 (NSN 2350-01-390-4683) (EIC:ACQ) Manual
Page Navigation
172

TM 9- 2350- 292- 20- 2 0383 00- 3 BRAKE LEVER AND BRACKET ASSEMBLY REPAIR (NEW CONFIGURATION WITH BRAKE MODULATION) -- CONTINUED 0383 00 Disassembly 1. Remove cotter pin (26) and straight headed pin (27) from brake pedal and bracket assembly (9). Discard cotter pin. 2. Remove two screws (28), two lockwashers (29) and brake pedal assembly (30) from bracket assembly (31). Dis- card lockwashers. 3. Remove screw (32), lockwasher (33), lever (34) and woodruff key (35) from brake pedal assembly (30). Discard lockwasher. 4. Remove four screws (36), four lockwashers (37), four bearing caps (38) and support assembly (39) from brake pedal assembly (30). Discard lockwashers. 5. Remove lubrication fitting (40) from brake pedal assembly (30). WARNING 6. Remove two retaining rings (41), two flat washers (42) and two roller bearings (43) from brake pedal assembly (30). Discard retaining rings. 7. Remove screw (44), lever (45) and woodruff key (46) from shaft (47). 9 29 28 27 26 31 30 39 38 38 34 33 32 46 38 37 36 45 36 37 38 44 40 41 42 43 43 42 41 47 35

Privacy Statement
Press Release
Contact