TM 9--2350--292--20--2
0425 00--2
ENGINE DECK BASE ASSEMBLY REPAIR -- CONTINUED
0425 00
Disassembly--Continued
WARNING
NOTE
Perform step 2 only if fibrous glass felt is damaged be-
yond repair.
2. Using dry--cleaning solvent, remove fibrous glass felt (7 and 8) from two retainers (4 and 5). Discard fibrous glass
felt.
3. Remove rubber seals (9 through 17) from retainers (4 and 5). Discard rubber seals.
4. Clean retainers (4 and 5) edges with solvent (item 91, WP 0716 00).
NOTE
There are four clamps on the engine deck. This task re-
places only one.
5. Remove nut (18), lockwasher (19), spring (20) and clamp (21) from base assembly (6). Discard lockwasher.
6. Inspect parts for damage and replace as required.
Figure 204
4
5
6
7
8
9
9
10
11
12
13
14
14
15
15
16
17
18
19
20
21