TM 9--2350--292--20--2
LEFT SIDE GAS PARTICULATE FILTER AND FIRE EXTINGUISHER
BRACKET SUPPORT REPLACEMENT
0473 00
THIS WORK PACKAGE COVERS:
Removal, Installation
INITIAL SETUP:
Tools and Special Tools
General mechanic’s tool kit (item 1, WP 0717 00)
Materials/Parts
Cotter pins (2) (item 126, WP 0718 00)
Lockwashers (3) (item 2, WP 0718 00)
Equipment Conditions
Portable fire extinguisher bracket removed
(WP 0472 00)
Gas particulate filter and frame removed
(WP 0706 00)
Removal
1. Remove two cotter pins (1), two flat washers (2) and mounting bracket (3) from mounting bracket (4). Discard
cotter pins.
2. Remove three screws (5), three lockwashers (6), two flat washers (7) and mounting bracket (4) from vehicle hull.
Discard lockwashers.
3. Inspect parts for damage and replace as required.
Installation
1. Install mounting bracket (4) on vehicle hull with three screws (5), three new lockwashers (6) and two flat washers
(7).
2. Install mounting bracket (3) on mounting bracket (4) with two flat washers (2) and two new cotter pins (1).
Figure 246
3
2
4
1
5
6
7
5
6
FORWARD
NOTE
FOLLOW--ON MAINTENANCE:
Install gas particulate filter and frame (WP 0706 00)
Install portable fire extinguisher bracket (WP 0472 00)
END OF TASK
0473 00--1/2 blank
