TM 9--2350--292--20--2
0478 00--2
AMMUNITION STOWAGE BOX ASSEMBLY, ODDMENT TRAY SHELF AND
SUPPORT REPLACEMENT -- CONTINUED
0478 00
Removal--Continued
5. Remove six screws (11), six lockwashers (12) and shelf (13) from box assembly (6). Discard lockwashers.
6. Remove three screws (14), three lockwashers (15) and three flat washers (16) securing box assembly (6) to bulk-
head. Discard lockwashers.
7. Remove two screws (17), two lockwashers (18), two flat washers (19) and box assembly (6) from vehicle floor.
Discard lockwashers.
8. Inspect parts for damage and replace as required.
Installation
NOTE
To remove box assembly from, or insert into vehicle, turn
box assembly on its face or back and slide box assembly
through personnel door.
1. Install box assembly (6) on vehicle floor with two screws (17), two new lockwashers (18) and two flat washers
(19).
2. Secure box assembly (6) to bulkhead with three screws (14), three new lockwashers (15) and three flat washers
(16).
3. Install shelf (13) on box assembly (6) with six screws (11) and six new lockwashers (12).
Figure 247
15
14
6
13
11
12
17
18
19
16
