SPADE RELEASE HYDRAULIC LINES AND FITTINGS REPLACEMENT

TM-9-2350-292-20-2 Recovery Vehicle Heavy Full-Tracked: M88A2 (NSN 2350-01-390-4683) (EIC:ACQ) Manual
Page Navigation
785

TM 9--2350--292--20--2 0575 00--1 SPADE RELEASE HYDRAULIC LINES AND FITTINGS REPLACEMENT 0575 00 THIS WORK PACKAGE COVERS: Removal, Installation INITIAL SETUP: Tools and Special Tools General mechanic’s tool kit (item 1, WP 0717 00) Materials/Parts Dust protective cap (AR) (item 44, WP 0716 00) Dust protective cap (AR) (item 46, WP 0716 00) Dust protective plug (AR) (item 14, WP 0716 00) Dust protective plug (AR) (item 47, WP 0716 00) Plastic bags (AR) (item 48, WP 0716 00) Marking tags (AR) (item 49, WP 0716 00) Sealing compound (item 16, WP 0716 00) Safety goggles (item 93, WP 0716 00) Wiping rags (item 7, WP 0716 00) Equipment Conditions Spade lowered to rest on ground (TM 9--2350--292--10) Subfloor plates #3, #4, #10, #11 and #12 removed (WP 0454 00) Hydraulic system depressurized (WP 0545 00) Hydraulic hose retainer and retainer cover removed (WP 0584 00) For maintenance of hose assembly #1 References TM 9--2350--292--10 Removal WARNING WARNING WARNING Hydraulic system pressure is rated 4450 psi. Do not torque hydraulic fittings or perform removal procedures when hydraulic system is pressurized. Discharging sys- tem pressure before performing any maintenance proce- dures will prevent injury to personnel. Eye protection will be worn when performing mainte- nance procedures on all hydraulic components to prevent injury to personnel.

Privacy Statement
Press Release
Contact