TM 9--2350--292--20--2
0586 00--7
AUXILIARY POWER UNIT ASSEMBLY REPLACEMENT -- CONTINUED
0586 00
Removal--Continued
NOTE
Perform the following steps to disconnect hydraulic lines
from APU assembly.
WARNING
CAUTION
To prevent contamination, cap or plug all open hydraulic
ports and fittings immediately after removing parts.
16. Remove locking clip (42) on coupling (43). Disconnect couplings (43 and 44).
17. Remove locking clip (45) on coupling (46). Disconnect couplings (46 and 47).
18. Disconnect coupling (48) from elbow (49).
Figure 27
49
46
45
47
44
42
43
48
