TM 9--2350--292--20--2
0610 00--4
AUXILIARY POWER UNIT FUEL FILTER ASSEMBLY REPLACEMENT --
CONTINUED
0610 00
Installation
NOTE
Perform the following procedures prior to installation of
fuel filter assembly into vehicle.
1. Apply sealing compound to all pipe threads prior to assembly.
2. Install pipe elbow (26) on fuel filter assembly (1).
3. Install gate valve (25) on pipe elbow (26). Tighten gate valve so that handle faces front and slightly below the hor-
izontal plane (10 degrees). Insure valve is open.
4. Install fuel line quick--disconnect coupling half (8) on gate valve (25).
5. Install pipe nipple (24) on fuel filter assembly (1).
6. Install pipe elbow (23) on pipe nipple (24).
7. Install small pipe nipple (22) on pipe elbow (23).
8. Install pipe elbow (21) on small pipe nipple (22).
9. Install pipe nipple (20) on pipe elbow (21).
10. Install fuel line quick--disconnect coupling half (7) on pipe nipple (20).
Figure 338
7
20
21
22
23
24
1
8
25
26
