SECTION IV: LIGHTING SYSTEM
TM 9-2350-256-20
6
Pull rigger's fixed spotlight (14) out of cab opening
by removing nut (15), collet (16), and nut (17).
b. DISASSEMBLY
1
Remove lens retainer (18) by removing screw
(19).
2
Disconnect and remove lamp (20) from rigger's
fixed spotlight (14).
c. ASSEMBLY
1
Install and connect lamp (20) to rigger's fixed
spotlight (14).
2 Install lens retainer (18) using screw (19).
d. INSTALLATION
NOTE
Clean and dry all parts.
1
Install rigger's fixed spotlight (14) in cab opening
using nut (15), collet (16), and nut (17).
2
Install connector shell (11) over wire (12) and
secure using C-washer (13).
3
Install switch assembly (9) on shaft (10).
4
Install body (8) using two screws (7).
5 Install gear bolt (6).
6
Install handle (3) and spacer (4) by tightening
screw (5).
7
Install socket head screw (2) and connect
connector (1).
6-69