SECTION V: VEHICLE VWIRING
TM 9-2350-256-20
a. REMOVAL
1 Disconnect connector (1) from APU control box (10).
2 Remove 19 clamps (11) by removing screw (12) and lockwasher (13) from each.
3 Disconnect connector (2) from switch panel to gage panel and miscellaneous switches wiring harness
(infrared night viewer) (single voltage) (14).
4 Disconnect two connectors (3 and 4) from gage panel to bulkhead wiring harness (15).
5 Disconnect connectors (5 and 6) from rigger's light selector switch (17).
6-217
'