RECOVERY VEHICLE, FULL TRACKED: MEDIUM, M88A1
EMERGENCY FLASHER CIRCUIT WIRING HARNESS MAINTENANCE
REMOVAL, REPAIR, INSTALLATION
Tools and Special Tools
Master switch off
Battery ground cables disconnected (TM 9-2350-256-20)
Disconnect emergency flasher circuit (no. 325) wiring harness from left front red flasher indicator lamp (1). Remove shell,
washer, and ferrule from cable (refer to WP 0033 00) so that cable can slide through narrow opening.
Remove interfering components as required for access.
Disconnect cable connectors, loosen or remove any cable clamps, and remove wirng harness.
Repair or Replacement
Repair wiring harness as required in accordance with WP 0033 00.
Replace missing or defective grommets as required.