TM 9--2350--292--20--1
0247 00--5
APU CONTROL BOX AND APU CONTROL BOX BRACKET REPAIR --
CONTINUED
0247 00
Disassembly--Continued
NOTE
There are two warning light assemblies. Perform steps
13 and 14 to disassemble one warning light assembly.
13. Remove lens (57), gasket (58), lamp (59), two screws (60), two lockwashers (61) and warning light socket assem-
bly (62) from enclosure assembly (19). Discard lockwashers and gasket.
14. Remove retainer (63) and shell receptacle (64) from warning light socket (65).
15. Remove two nuts (66), two lockwashers (67), pressure indicator mount (68) and pressure indicator (69) from
enclosure assembly (19). Retain attaching hardware for installation.
16. Remove six screws (70), six nuts (71), six lockwashers (72), lead assembly 4W123--2 (32), lead assembly
4W123--1 (31), lead assembly 4W123--3 (37) and three circuit breakers (73) from enclosure assembly (19).
Discard lockwashers.
17. Inspect parts for damage and replace as required.
Figure 66
73
37
72
71
57
58
59
65
64
63
62
70
70
61
60
69
19
70
7172
32
73
31
71
72
73
66
67
68