TM 9--2350--292--20--1
0249 00--2
HIGH BEAM INDICATOR ASSEMBLY AND BRACKET REPAIR -- CONTINUED
0249 00
Disassembly
NOTE
Perform Disassembly and Assembly procedures to
complete repair of the indicator.
1. Remove two screws (14), retaining plate (15) and shell receptacle (16) from lamp body (17).
2. Inspect parts for damage and replace as required.
Assembly
Install shell receptacle (16) and retaining plate (15) to lamp body (17) with two screws (14).
Installation
1. Install bracket (13) on vehicle with two screws (12), four flat washers (11), two new lockwashers (10) and two nuts
(9).
2. Install plate (8) and indicator (2) with two screws (6) and two new lockwashers (7).
3. Install bulb (5), new gasket (4) and lens (3).
4. Connect wiring harness 4W107 connector P3 (1) to connector socket J1 of high beam indicator (2).
Figure 80
1
2
6
7
8
3
4
5
12
11
11
10
9
13
17
16
15
14
NOTE
FOLLOW--ON MAINTENANCE:
Connect battery power (WP 0256 00)
END OF TASK