TM 9--2350--292--20--1
0288 00--6
BATTERY, BATTERY TRAY AND BATTERY TERMINAL REPLACEMENT --
CONTINUED
0288 00
Installation--Continued
NOTE
Ensure battery terminals are installed with identification
markings (P or +) or (N or --) facing up. Terminals with
the P or + marking are installed on the positive (+) battery
posts and terminals with the N or -- marking are installed
on the negative (--) battery posts.
6. Install 12 terminal covers (6) on battery posts.
7. Install six positive (P or +) battery terminals (4) on six positive (+) battery posts. Install six negative
(N or --) battery terminals (4) on six negative (--) battery posts. Position battery terminals (4) as shown in illustra-
tion to permit fastening all lead assemblies when reconnecting battery power.
8. When terminals (4) are properly positioned, tighten collared nut (5) until terminals (4) are secured to posts.
9. Connect three lead assemblies 3W266 (1) by inserting screw (3) through battery terminal (4). Install lead assembly (1)
over screw (3) and tighten securely with nut (2).
Figure 102
1
2
3
4
4
4
4
4
5
5
5
5
5
4
5
2
1
2
3
4
4
5
5
2
1
2
3
4
4
5
5
2
4
5
4
5
6
6
6
6
6
6
6
NOTE
FOLLOW--ON MAINTENANCE:
Connect battery power (WP 0256 00)
END OF TASK