TM 9--2350--292--20--1
0084 00--1
GENERATOR OUT INDICATOR DOES NOT LIGHT WHEN GENERATOR
SWITCH IS PLACED IN ON POSITION
0084 00
THIS WORK PACKAGE COVERS:
Generator Out Indicator Does Not LIght When Generator Switch is Placed in On Position
INITIAL SETUP:
Tools and Special Tools
General mechanics tool kit (item 1, WP 0717 00)
Multimeter (item 84, WP 0717 00)
Equipment Conditions
Vehicle MASTER switch OFF (TM 9--2350--292--10)
Personnel Required
Two
Is 24 V dc present?
1. Disconnect harness 4W153 P1 from accessory
panel.
2. Turn MASTER switch ON
(TM 9--2350--292--10).
3. Place multimeter red lead in harness 4W153 P1
socket H and black lead to ground. Check for
voltage.
4. Turn MASTER switch OFF
(TM 9--2350--292--10).
no
yes
Repair (WP 0290 00) or
replace (WP 0327 00)
harness 4W153. Verify
fault is corrected.
A
CONTINUED ON NEXT PAGE
WARNING
Remove rings, bracelets, wristwatches,
and neck chains before working on any
vehicle. Jewelry can catch on equip-
ment and cause injury, or may short
across an electrical circuit and cause
severe burns or electrical shock.