TM 9--2350--292--20--2
0401 00--3
STEERING CONTROL ASSEMBLY REPAIR -- CONTINUED
0401 00
Assembly
1. Install two bearings (34) and two pins (32 and 33) in steering control housing (27).
2.
Install two lubrication fittings (30 and 31) in steering control housing (27).
WARNING
3. Install steering column (21) in steering control housing (27) with flat washer (29) and new retaining ring (28).
4. Install two spacers (26), spring (25), bell crank (10) and headless pin (24) on steering control housing (27).
5. Secure headless pin (24) with two flat washers (23) and two new cotter pins (22).
6. Install spring (20) and remote control lever (6) on steering column (21) with headed pin (19) and new cotter pin
(18).
7. Install proximity switch (17) (WP 0287 00).
Figure 192
17
21
34
32
27
31
26
23
29
28
20
18
19
30
25
10
24
22
23
26
34
33
6