TM 9--2350--292--20--2
0402 00--2
STEERING CONTROL LOCKING ROD ASSEMBLY REPAIR -- CONTINUED
0402 00
Disassembly
1. Loosen two nuts (9), remove two clevises (5) and two nuts (9) from stud (10).
2. Inspect parts for damage and replace as required.
Assembly
Loosely install two nuts (9) and two clevises (5) on stud (10).
Installation
1. Install locking rod assembly (6) on locking bar (8) and steering wheel assembly (7) with headless pin (3), two flat
washers (4), straight headed pin (2) and three new cotter pins (1).
2. Adjust steering control locking rod assembly (WP 0358 00).
Figure 192
1
1
2
4
6
5
8
3
4
7
5
9
9
10
END OF TASK