ANNUAL NOTES (CONTINUED)
Note 54
TOW WHINCH DRAIN AND FILL
Drain oil from tow winch.
A Rotate drum until drain and check plugs (1) and (2) are down.
B Remove drain and check plugs (1) and (2) from both ends of
drum and drain oil into a suitable container.
WARNING
Dry cleaning solvent (SD2) is toxic and flammable.
Wear protective goggles and gloves and use only in
well-ventilated area.
C Clean drain and check plug (1) with solvent SD2 and install in
brake end.
D Rotate drum until drain and check plug (1) is horizontal (3 or 9
o'clock) position.
E Remove fill plug (3) from support bracket.
F Add oil (OE/HDO or OEA) at fill plug (3) opening until oil comes
out drain and check plug (2) opening at motor end.
G Clean drain and check plug (2) and fill plug (3) with solvent
SD2 and install.
\
MOTOR END
C a r d 31 of 40
LO 9-2350-238-12