TM 1-1680-320-13&P
HIGH PERFORMANCE RESCUE HOIST ASSEMBLY
CONTROL PENDANT ASSEMBLY - INSPECT
INITIAL SETUP
Personnel Required: 1
References:
UH-1: 15N, Helicopter Repairer
AVUM/AVIM Manual for General Aircraft
UH-60: 15T, Helicopter Repairer
Maintenance TM 1-1500-204-23 series
Hoist Certified: 91W, Flight Medic
Cleaning Corrosion Control Manual
Electrical: 15F, Aircraft Electrical Repairer
TM 1-1500-344-23 series
Parts/Materials:
Adhesive (WP 0047 00, Table 1, Item 3)
Lockwire (WP 0047 00, Table 1, Item 21)
Tools and Special Tools:
Tool Kit, Aircraft Mechanic
NSN 5180-00-323-4915
Shop Set, Intermediate Maintenance
NSN 4920-00-472-4183
Air Source, 35 psi (241.3 kPa)
1. Inspect control pendant for nicks, cracks, dents, gouges, and corrosion.
2. Inspect control cable for cuts, tears, fraying, and broken insulation.
3. Inspect cable connector for bent, broken, and missing pins. Check for crossed stripped and damaged threads.
4. Ensure operational switches operate smoothly, free of binding and sticking.
5. Ensure bulb illuminates. If bulb is inoperative replace by:
a. Unscrewing caution indicator (amber) or overtemp indicator (red).
b. Replace bulb(s).
c.
Reinstall caution indicator (amber) or overtemp indicator (red).
6. Ensure identification plate is properly attached to the control pendant assembly and is legible.
