TM 10-1670-262-12&P
1-5. Equipment Characteristics, Capabilities, and Features - continued.
(2)
Bridle. The bridle (fig. 1-2) is made of nylon webbing with a V-shape design. A D-ring (1) is located on
the single end of the bridle body (2) and a snap hook (3) is secured to each of the two bridle running
ends. During use, the D-ring is connected to a suspension rope snap hook while the two bridle snap
hooks are attached to the two personnel harness lift V-rings.
Figure 1-2.
The Bridle.
1-4
