TM 9-2350-238-34-2
12 If damaged, remove three drive screws
(15) and boom winch control cylinder
barrel identification plate (16) from
cylinder boom barrel (3).
INSPECTION/REPAIR
1 Inspect for broken, damaged, or missing parts.
2 If cylinder boom barrel is broken, damaged, or missing, repair is by replacement of next
higher assembly.
3 If any kit component is damaged, replace entire repair parts kit.
4 Repair is by replacement of authorized parts (TM 9-2350-238-24P-2).
1 If removed, install new boom winch con-
trol cylinder barrel identification plate (1)
and three new drive screws (2).
2
Apply sealing compound (item 19, appx B)
to threads of boom cylinder piston rod end
connector (3).
Do not place piston in vise for
disassembly. Damage can result,
causing malfunction or leakage.
3 Using strap wrench, screw boom cylinder
piston rod end connector (3) into hydraulic
piston (4) until it bottoms against
hydraulic piston shoulder.
2-91