NOTE
Perform installation procedures prior
to adjustment of pressure relief
valve. Refer to page 2-192.
1 Perform adjustment of check valve pro-
cedures. Refer to page 2-179.
2 Turn off hydraulic system. Refer to TM
9-2350-238-10.
3 Remove retainer cap (1) from relief valve
(2).
4 Install 3000 psi (20,688 kPa) oil pres-
sure tester in test port (3).
5 Pull out TOW WINCH BRAKE PRESSURE
SELECTOR knob (4).
TM 9-2350-238-34-2
ADJUSTMENT
2-201
