TM 9-2350-238-34-2
2-44. MAINTENANCE OF SOLENOID VALVE (CONT).
REASSEMBLY
1 Apply engine oil (item 15, appx B) to
5
new preformed packings (1, 2, 3, 4, and
5), piston guide (6), piston (7), and pack-
ing retainer (8).
6
2 Install new preformed packing (1), pack-
ing retainer (8), and new preformed
packing (2) on solenoid valve (9).
7
3 Install solenoid valve (9) on pilot cap
(lo).
8
4 Install poppet (11), poppet spring (12),
new preformed packing (3), spring seat
(13), and using retaining ring pliers, in-
9
stall retainer cap (14).
Install pressure adjusting screw (15), and
adjusting screw hexagon jam nut (16) in
pilot cap (10).
Install piston (7), piston spring (17), pis-
ton guide (6), and new preformed Pack-
ing (4) in valve body (18).
Install new preformed packing (5) on pi-
lot cap (10).
Install pilot cap (10) and four pilot cap-
screws (19) on valve body (18).
Perform installation procedures prior to
high-pressure setting adjustment of sole-
noid valve. Refer to page 2-192.
2-210
