TM 9-2350-238-34-2
HIGH-PRESSURE SETTING ADJUSTMENT
l Make sure all personnel stand clear when operating boom to avoid injury to
personnel.
l When testing hydraulic system, be sure boom is in stowed position as failure of
system may result in injury to personnel.
1 Perform adjustment of check valve pro-
cedure. Refer to page 2-179.
2 Turn off hydraulic system. Refer to TM
9-2350-238-10.
3 Set SUSP VALVE lever (1) to LOCKED.
4 Remove pilot cap (2) from solenoid valve
(3).
2-211
