Crossing Class 60 Bridge, Armored Vehicle Launched

OPERATING PROCEDURES - TM-9-2350-256-10_151

TM-9-2350-256-10 Carrier Cargo Tracked 6-Ton M548A1 (2350-01-096-9356) Manual
Page Navigation
135

TM 9-2350-256-10 (1) Stop vehicle (see para. 2-10i). (2) Idle engine at 1000 to 1200 rpm for 3 to 5 minutes to cool it off. Bring idle down to 675 to 725 rpm after cooling period. (3) Hold ENGINE FUEL SHUTOFF switch (1) down until engine stops. NOTE If engine fails to shut off, pull manual fuel shutoff handle (2) until engine stops. Notify unit maintenance. (5) Turn MASTERS switch to OFF. 1. Crossing Class 60 Bridge, Armored Vehicle Launched (NSN 5420-00-522-9599). WARNING Failure to observe following precautions when crossing the Class 60 Bridge, Armored Vehicle Launched, may cause injury to personnel or structural damage to bridge. (1) Center vehicle on bridge. (2) Cross bridge at speeds no higher than 8 mph (13 km/h). (3) Do not stop, accelerate, or shift gears while crossing bridge. 2-119

Privacy Statement
Press Release
Contact