TM 9-2350-256-10
Table 3-1. Troubleshooting Procedures-Continued.
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
STARTING SYSTEM-Continued.
Step 2.
Check for leaking, damaged, or loose oil line connections.
Notify unit maintenance.
13.
EXCESSIVE OIL BEING USED.
Step 1.
Check engine compartment for leaks.
Notify unit maintenance.
Step 2.
Check engine oil level for overfill.
Drain to proper level as specified in Appendix F.
Step 3.
Check air cleaners for dirt and debris which may get into
cylinders causing excessive wear.
Clean air cleaners (see para. 3-10) and notify unit
maintenance.
14.
NO OIL PRESSURE.
Step 1.
Check engine oil level.
Fill as specified in Appendix F.
Step 2.
Check for excessive oil leak.
Notify unit maintenance.
15.
ENGINE OIL TEMPERATURE EXCEEDS 240F (115C).
Step 1.
Check engine oil high temperature warning light, gage, and
horn.
Stop engine and notify unit maintenance.
Step 2.
Problem occurs during towing operation.
Shift transmission to lower gear.
OPERATOR'S CONTROLS
16.
VEHICLE WILL NOT STEER OR STEERS IN ONLY ONE DIRECTION.
Check for bent, missing, loose, or improperly adjusted steering control
linkage.
Notify unit maintenance.
17.
BRAKES WILL NOT EFFECTIVELY STOP VEHICLE OR DRAG AT ONE OR BOTH SIDES.
Check for loose, missing, bent, or broken linkages.
Notify unit maintenance.
3-10
