TM 9-2350-256-10
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
18.
ENGINE DOES NOT RESPOND PROPERLY TO THROTTLE CONTROL.
Check for loose, missing, bent, broken, or improperly adjusted
accelerator control linkage.
Notify unit maintenance.
19.
PURGE PUMP HANDLE OPERATES TOO EASILY.
Check for broken pump lines, bad pump, or clogged lines to pump.
Purge pump should operate with some resistance. If
handle operates too easily, notify unit maintenance.
TRANSMISSION
20.
VEHICLE WILL NOT DRIVE IN FORWARD OR REVERSE GEARS.
Check for bent, missing, loose, or improperly adjusted shift linkage.
Notify unit maintenance.
21.
TRANSMISSION OIL PRESSURE LOW.
Step 1
Check oil level.
Fill as specified in Appendix F.
Step 2.
Check for leaks.
Notify unit maintenance.
22.
TRANSMISSION OIL HIGH TEMPERATURE WARNING LIGHT AND HORN COME ON.
Step 1.
Check oil coolers for restriction of airflow.
Clean away debris. If problem continues, notify unit
maintenance.
Step 2.
Check transmission oil level.
Fill as specified in Appendix F.
Step 3.
Problem occurs during towing operation or when operating on
rough ground.
Shift transmission to lower gear.
23.
VEHICLE DRIVES IN ONE GEAR, CREEPS IN N, BUT STALLS WHEN SHIFTED TO ANOTHER GEAR.
Check for missing, bent, or loose shift linkage.
Notify unit maintenance.
3-11
