TM 9-2350-256-10
(c)
Loosen two wingnuts (5) and turn two retainers (6) until they clear periscope (7).
(d)
Pull down on periscope (7) to remove it from recess.
(2)
Installation.
(a)
Insert periscope (7) into recess.
(b)
Turn two retainers (6) and tighten two wingnuts (5) to secure periscope (7).
WARNING
Chock roadwheels to prevent vehicle from rolling.
NOTE
Steps (c) and (d) below apply only to vehicles equipped with exhaust smoke
generating system.
(c)
Turn steering wheel (1) right.
(d)
Install vehicle exhaust smoke bracket (4), two washers (3), and two screws (2).
3-37