TM 9-2350-256-10
3-12. OXYGEN CYLINDER AND REGULATOR VALVE REPLACEMENT-Continued.
CAUTION
Cap oxygen cylinder when regulator valve and gages (3) are detached. Keep
fittings clean at all times.
b.
Installation.
(1)
Lay oxygen cylinder (7) between two strap assemblies (6).
(2)
Rotate oxygen cylinder (7) so valve outlet inside safety cap (4) is pointing up.
(3)
Tighten nut (5) on two strap assemblies (6) to secure oxygen cylinder (7).
(4)
Position regulator valve and gages (3) so
they can be easily read.
(5)
Aline valve (3) fitting to oxygen cylinder (7)
and tighten nut (2).
(6)
Refer to TM 9-237 for regulator valve
operation instructions.
3-54
