TM 9-2350-256-20-1
0032 00
CORRECTIVE ACTION Continued
10. Inspect boom limit valves for proper adjustment. Adjust boom limit valves (see WP 0415 00). If any
defects exist, notify Direct Support Maintenance. If boom still operates with difficulty, notify Support
Maintenance. If boom operates properly but creeps (fails to maintain position), go to step 11.
WARNING
Do not attempt to loosen or tighten hydraulic fittings or lines when system is pressurized. Severe injury
or death to personnel may result.
11. Inspect hydraulic lines and connections for leaks. Replace leaking hydraulic lines and tighten leaking
connections (see WP 0416 00). If leaks persist or boom continues to creep, notify Direct Support
Maintenance.
12. Visually inspect stayline cables to ensure cable connections are intact. Adjust stayline cylinder
limit valves (see WP 0415 00). If cables still become slack after adjustment, notify Direct Support
Maintenance.
END OF WORK PACKAGE
0032 00-3/4 blank
