TM 9-2350-256-20-1
0048 00
CORRECTIVE ACTION Continued
7.
Open air inlet doors (TM 9-2350-256-10). Disconnect bulkhead to engine bracket and rear fuel tank
transmitter wiring harness from bulkhead disconnect. Place red lead of multimeter in pin N of wire
31 and black lead to ground and check for voltage. If voltage is present, go to step 8. If voltage is not
present, repair/replace wire 31 of gage panel to bulkhead wiring harness (see WP 0194 00 for dual
voltage; 0195 00 for single voltage).
Reconnect bulkhead to engine bracket and rear fuel tank transmitter wiring harness to bulkhead.
8.
Disconnect wire 31 from rear fuel tank transmitter. Place red lead of multimeter in wire 31 and black
lead to ground and check for voltage. If voltage is present, replace rear fuel tank transmitter (see
WP 0121 00). If voltage is not present, repair/replace bulkhead to engine bracket and rear fuel tank
transmitter wiring harness (see WP 0222 00 for dual voltage; 0223 00 for single voltage).
END OF WORK PACKAGE
0048 00-6
