TM 9-2350-256-20-1
0049 00
CORRECTIVE ACTION Continued
engine bracket and rear fuel tank transmitter wiring harness (see WP 0222 00 for dual voltage; 0223 00
for single voltage).
7.
Reconnect bulkhead to engine bracket and rear fuel tank transmitter wiring harness to engine discon-
nect. Remove powerplant (see WP 0098 00). Disconnect wire 33 from engine oil temperature sending
unit. Place red lead of multimeter on wire 33 and black lead to ground. Turn MASTER switch on and
check for voltage. Turn MASTER switch OFF. If voltage is present, replace engine oil temperature
sending unit (see WP 0171 00). If voltage is not present, repair/replace wire 33 of engine wiring harness
(see WP 0207 00 for dual voltage; 0208 00 for single voltage).
END OF WORK PACKAGE
0049 00-5/6 blank
