TM 9-2350-256-20-1
0075 00
CORRECTIVE ACTION Continued
3.
Disconnect electrical accessories panel wiring harness from electrical accessories panel. Place a
jumper wire from pin A to socket A of wire 38/59. Place red lead of multimeter on pin F of wire 38 and
black lead to ground. Turn MASTER switch on and check for voltage. Turn MASTER switch OFF. If
voltage is present, repair/replace wire 38/138 of electrical accessories panel wiring harness (see WP
0196 00). If voltage is not present, go to step 4.
4.
Place red lead of multimeter in socket A of wire 38/59 and black lead to ground. Turn MASTER switch
on and check for voltage. Turn MASTER switch OFF. If voltage is present, go to step 5. If voltage is
not present, go to step 7.
0075 00-4
