TM 9-2350-256-20-1
0088 00
CORRECTIVE ACTION Continued
5.
Reconnect wire to purifier switch. Disconnect wire from switch side of circuit breaker. Place red lead
of multimeter on circuit breaker terminal and black lead to ground. Turn MASTER switch on and
check for voltage. Turn MASTER switch OFF. If voltage is present, repair/replace wire from purifier
switch to circuit breaker (see WP 0439 00). If voltage is not present, go to step 6.
6.
Reconnect wire to switch side of circuit breaker. Disconnect wire from dome light side of circuit
breaker. Place red lead of multimeter in wire and black lead to ground. Turn MASTER switch on and
check for voltage. Turn MASTER switch OFF. If voltage is present, replace circuit breaker (see WP
0441 00). If voltage is not present, go to step 7.
0088 00-4
