TM 9-2350-256-20-1
0096 00
ITEM
INTERVAL
MAN-
ITEM TO BE
PROCEDURE
EQUIPMENT
NO.
HOUR
CHECKED OR
NOT READY
SERVICED
AVAILABLE IF:
6
S
Bumper Springs
a. Visually inspect for broken, cracked, or compressed bumper
springs. Refer to WP 0284 00 for removal and installation instruc-
tions.
b. Tighten loose mounting bolts. Torque bolts (1) to 350400 lb-ft
(475542 Nm) and bolts (2) to 150170 lb-ft (203231 Nm).
7
S
Torsion Bar
Anchors
a. Visually inspect torsion bar anchors to ensure that they are fully
Two or more torsion bar
seated and retaining screws are in place and secure. Torque screws
anchors unserviceable on
to 4050 lb-ft (5468 Nm).
any one side.
0096 00-6
