TM 9-2350-256-20-1
0097 00
12. Breather cap-hoist winch gear case.
a.
Open access door (17).
b.
Remove breather cap (18) and clean it with cleaning compound (item 9, WP 0489).
c.
Install breather cap (18).
d.
Close access door (17).
13. Hoist winch gear case fill and level.
a.
Open access door (17).
b.
Remove bayonet gage (19) and check to see that oil level is not below ADD mark on the gage rod. If necessary, add
GO (see Table 2) up to FULL mark.
c.
Close access door (17).
0097 00-18
