TM 9-2350-256-20-1
0102 00
Removal
1.
Remove horizontal shaft (1) from universal joints (2 and 3) at each end of shaft by removing two cotter pins (4) and two
straight pins (5).
2.
Remove universal joint (2) from base assembly (6) by removing cotter pin (7) and straight pin (8).
3.
Remove base assembly (6) by removing four screws (9) and four lockwashers (10).
4.
Remove shaft (11) from universal joints (12 and 13) at each end of shaft by removing two cotter pins (14) and two straight
pins (15).
5.
Remove drive assembly (16) by removing three screws (17), three lockwashers (18), and three nuts (19).
0102 00-2
