TM 9-2350-256-20-1
0102 00
11. Remove ID plate (29) and bracket (30) by removing four screws (31) and four lockwashers (32).
12. Remove drive assembly bracket (33) by removing four screws (34) and four lockwashers (35).
Installation
1.
Install drive assembly bracket (33) with four screws (34) and four lockwashers (35).
2.
Install ID plate (29) and bracket (30) with four screws (31) and four lockwashers (32).
3.
Install vertical shaft (25) and tighten collar (28).
4.
Install universal joint (13) on vertical shaft (25) with straight pin (27) and cotter pin (26).
5.
Install two keys (24) to drive assembly (16).
6.
Install two couplings (22) to drive assembly (16) with two setscrews (23).
0102 00-5