TM 9-2350-256-20-1
0105 00
Installation
1.
Install oil level indicator tube (13) with three self-locking nuts (14) and gasket (15).
2.
Install ID plate (10) with two drivescrews (11) and two flat washers (12) to oil level indicator tube cap assembly (2).
3.
Install gasket (8) with two preformed packings (9) onto oil level indicator tube cap assembly (2).
4.
Install oil level indicator tube cap assembly (2) on right front upper cover (3) with two screws (6) and two lockwashers (7).
5.
Install right front upper cover (3) and strap (4) with 12 screws (5).
6.
Install oil level gage rod (1).
7.
Replace engine oil (refer to TM 9-2350-256-10).
NOTE
Follow-on maintenance: Install powerplant (see WP 0098 00).
END OF WORK PACKAGE
0105 00-3/4 blank
