TM 9-2350-256-20-1
0106 00
Installation
1.
Install bracket (18) with two screws (19) and two lockwashers (20).
2.
Install bracket (14) with two screws (15), two flat washers (16), and two self-locking nuts (17).
3.
Install ID plate (11) with two flat washers (13) and two drivescrews (12).
4.
Install upper oil fill tube assembly (10) with two clamps (9), two self-locking nuts (7), and two screws (8).
5.
Connect rubber hose (6) between lower oil fill tube (1) and upper oil fill tube assembly (10). Secure with two clamps (5).
6.
Install lower oil fill tube (1) and gasket (4) with three screws (2) and three packings (3).
7.
Replace engine oil (refer to TM 9-2350-256-10).
NOTE
Follow-on maintenance: Install powerplant (see WP 0098 00).
END OF WORK PACKAGE
0106 00-3/4 blank
