TM 9-2350-256-20-1
0108 00
Removal
1.
Remove tube (1) by removing hose clamps (2) from each end.
2.
Remove air duct hose (3) by removing hose clamp (4).
3.
Remove air duct hose (5) by removing hose clamp (6).
4.
Remove self-locking nut (7), washer (8), and loop clamp (9).
5.
Remove tube (10) by removing hose clamps (11) from each end.
6.
Remove air duct hose (12) by removing hose clamp (13).
7.
Remove two screws (14), two lockwashers (15), breather (16), two gaskets (17), and spacer plate (18).
8.
Remove air duct hose (19) by removing hose clamp (20).
9.
Remove two self-locking nuts (21), flange adapter (22), and gasket (23).
Installation
1.
Install breather (16), two lockwashers (15), two gaskets (17), spacer plate (18), and two screws (14). Tighten screws.
2.
Install gasket (23), flange adapter (22), and two self-locking nuts (21).
3.
Install air duct hose (19) by installing hose clamp (20). Tighten hose clamp.
4.
Install air duct hose (12) by installing hose clamp (13). Tighten hose clamp.
5.
Install tube (10) by installing hose clamps (11) at each end. Tighten hose clamps.
6.
Install loop clamp (9) and washer (8) with self-locking nut (7).
7.
Install air duct hose (5) by installing hose clamp (6). Tighten hose clamp.
8.
Install air duct hose (3) by installing hose clamp (4). Tighten hose clamp.
9.
Install tube (1) by installing hose clamps (2) at each end. Tighten hose clamps.
0108 00-2
