TM 9-2350-256-20-1
0109 00
NOTE
Removal and installation procedures are the same for both the left- and right-side cylinder head oil pan
drain tubes.
NOTE
Remove clamps (1) as necessary.
Removal
1.
Remove cylinder head oil pan drain tube (2) and gasket (3) by removing two screws (4), two lockwashers (5), and two hose
clamps (6).
2.
Remove two hoses (7) by removing two hose clamps (8).
3.
Remove drain tube (9) and hose (10) by removing two hose clamps (11).
4.
Remove tube (12) by removing two screws (13) and two lockwashers (14).
5.
Remove drain tube assembly (15) and hose (16) by removing two hose clamps (17), lockwire (18), screw (19), and two flat
washers (20).
6.
Remove tube assembly (21) and hose (16) by removing two hose clamps (17), lockwire (18), screw (19), and two flat
washers (20).
7.
Remove tube assembly (22) and hose (16) by removing two hose clamps (17), lockwire (18), screw (19), and two flat
washers (20).
8.
Remove tube assembly (23) and hose (16) by removing two hose clamps (17), lockwire (18), screw (19), and two flat
washers (20).
9.
Remove tube assembly (24) and hose (16) by removing two hose clamps (17), lockwire (18), screw (19), and two flat
washers (20).
10. Remove tube assembly (25) and hose (26) by removing two hose clamps (27), lockwire (18), screw (19), and two flat
washers (20).
11. Remove tube (28) and hose (29) by removing two hose clamps (30).
12. Remove elbow (31) and gasket (32) by removing two screws (33) and two lockwashers (34).
0109 00-2
