TM 9-2350-256-20-1
0114 00
Removal
1.
Remove 12 retaining straps (1) and 24 fairlead halves (2) by removing 24 self-locking nuts (3) and 24 screws (4).
2.
Remove 14 retaining straps (5) and 14 fairlead halves (6) by removing self-locking nut (7) and screw (8) from each.
3.
Remove spacer plate (9) and two retaining straps (10) by removing self-locking nut (11) and screw (12).
4.
Remove two retaining straps (13), four fairlead halves (14), and spacer plate (15) by removing two nuts (16) and two screws
(17).
5.
Remove retaining strap (18) and two fairlead halves (19) by removing two screws (20).
6.
Remove bracket (21) by removing two self-locking nuts (22).
7.
Remove retaining strap (23) and two fairlead halves (24) by removing two self-locking nuts (25) and two screws (26).
8.
Remove bracket (27) by removing two self-locking nuts (28).
9.
Remove 4 retaining straps (29) and 8 fairlead halves (30) by removing 16 self-locking nuts (31) and 16 screws (32).
10. Remove four brackets (33) by removing eight self-locking nuts (34).
NOTE
To aid in installation, tag all tube assemblies before removal.
11. Remove 12 tube assemblies (3546) by loosening coupling nuts at each end of tube assembly.
Installation
NOTE
When tightening coupling nuts, first tighten coupling nut snugly to seat sleeve and then tighten an
additional 1/16 (minimum) to 1/3 (maximum) of a turn to complete operation.
1.
Install 12 tube assemblies (3546) by tightening coupling nuts at each end of tube assembly. Remove tags.
2.
Install four brackets (33) with eight self-locking nuts (34).
3.
Install 4 retaining straps (29) and 8 fairlead halves (30) with 16 self-locking nuts (31) and 16 screws (32).
4.
Install bracket (27) with two self-locking nuts (28).
5.
Install retaining strap (23) and two fairlead halves (24) with two self-locking nuts (25) and two screws (26).
6.
Install bracket (21) with two self-locking nuts (22).
7.
Install retaining strap (18) and two fairlead halves (19) with two screws (20).
8.
Install two retaining straps (13), four fairlead halves (14), and spacer plate (15) with two screws (17) and two nuts (16).
9.
Install spacer plate (9) and two retaining straps (10) with self-locking nut (11) and screw (12).
10. Install 14 retaining straps (5) and 14 fairlead halves (6) each with screw (8) and self-locking nut (7).
11. Install 12 retaining straps (1) and 24 fairlead halves (2) with 24 self-locking nuts (3) and 24 screws (4).
NOTE
Follow-on maintenance: Install engine cooling fan shroud and related parts (see WP 0146 00); Install
engine right and left upper covers (see WP 0115 00).
0114 00-2
