TM 9-2350-256-20-1
UNIT MAINTENANCE
RECOVERY VEHICLE, FULL TRACKED: MEDIUM, M88A1
NSN 2350-00-122-6826, EIC AQA
ELECTRIC FUEL PUMP MAINTENANCE
REMOVAL, DISASSEMBLY, ASSEMBLY, INSTALLATION, TESTING
INITIAL SETUP:
Tools and Special Tools
Materials/Parts (cont.)
Tool kit, general mechanic's (item 59, WP 0490 00)
Packing (item 133, WP 0491 00)
Suitable container
Screws (12) (item 383, WP 0491 00)
Screw (item 569, WP 0491 00)
Materials/Parts
Screw (item 571, WP 0491 00)
Seal (item 430, WP 0491 00)
Tape, sealant (item 34, WP 0489 00)
Gasket (item 58, WP 0491 00)
References
Gasket (item 107, WP 0491 00)
Gasket (item 287, WP 0491 00)
TM 9-2350-256-10
Lockwashers (3) (item 120, WP 0491 00)
Lockwasher (item 617, WP 0491 00)
Equipment Condition
Lockwashers (2) (item 618, WP 0491 00)
Lockwashers (12) (item 639, WP 0491 00)
Intermediate rear left-center floor plate removed (see WP
Nuts (3) (item 127, WP 0491 00)
0302 00)
WARNING
Do not smoke or use open flame when working on fuel system: explosion may occur, causing severe
injury or death.
CAUTION
Do not allow gasket particles, dirt, rags, or other foreign material to enter fuel tank while electric fuel
pump is removed. If electric fuel pump is not immediately replaced, cover opening with sealant tape or
other suitable material.
0116 00-1
