TM 9-2350-256-20-1
UNIT MAINTENANCE
RECOVERY VEHICLE, FULL TRACKED: MEDIUM, M88A1
NSN 2350-00-122-6826, EIC AQA
FUEL VALVE LINES AND FITTINGS MAINTENANCE
REMOVAL, REPAIR, INSTALLATION
INITIAL SETUP:
Tools and Special Tools
Equipment Condition
Tool kit, general mechanic's (item 59, WP 0490 00)
Fuel tank drain valves opened and fuel tank drained,
or fuel shutoff valves turned to OFF (refer to TM
Materials/Parts
9-2350-256-10)
Rear center floor plate removed (see WP 0297 00)
Tape, sealant (item 34, WP 0489 00)
Rear left-side intermediate floor plate removed (see WP
Bushing (item 304, WP 0491 00)
0298 00)
Bushing (item 855, WP 0491 00)
Stowage basket center left floor plate removed (see WP
Grommet (item 664, WP 0491 00)
0299 00)
Lockwashers (10) (item 638, WP 0491 00)
Intermediate rear left-side floor plate removed (see WP
Screws (10) (item 370, WP 0491 00)
0301 00)
Toolbox rack removed (see WP 0332 00)
WARNING
Do not smoke or use open flame when working on fuel system: explosion may occur, causing severe
injury or death.
NOTE
For installation purposes, parts indicated with an asterisk (*) need sealant tape.
0123 00-1
